SZL Assembled Chain Grate Coal Fired Boiler
Capacity 6-25 t/4.2-17.5MW
Pressure ≤2.5MPa
Lower fuel costs:

More combustion heat was being transferred into the boiler water. Combustion chamber airtightness and thermal conductivity directly influence thermal efficiency as well as boiler economical benefits. Because each 40°F reduction in the boiler flue gas temperature results in a 1% boiler-efficiency improvement. Fuel costs have decreased by approximately 4%.

Available to burn low grade fuel:

a. Longer Fuel Combustion Period. Front arch is higher and shorter than rear arch, 45° angle between the two arches, which can extend the time of flue gas combustion time, and enhance thermal transferring efficiency.

b. It can burn low calorific value coal such as brown coal, lean coal, and flue coal. 

The overload ability strengthened:

The length of the front and back shaft is longer than the other ones, which prolongs the time of fuel combustion in the furnace and lower the carbon content in the furnace slag. Thus, the overload ability of the boiler is strengthened with the increased effect area of furnace grate.

Burning effect is good:

Wind is feed from both sides of the boiler. There are six independent air chambers, each of them has independent air adjustment device which can respectively adjust the air volume so as to achieve the best combustion effect.

Ask ZBG Engineer For Customized Boiler
Related Projects

We have 10000+ projects around the world

Get A Free Quote

Please fill in the form below to send us a brief message, and we will get back to you as soon as possible.

Name: E-mail: Your Needs: Other Demand: